fredag den 13. februar 2015

DJI Phantom Gopro 2 3 CNC Metal Brushless Camera Gimbal with Motors & Controller

Well have had this gimbal for a while but have not really gotten to use it very much as i was crashing half of the time. On one flight i practically destroyed the frame of the gimbal, the USB connector on the board came off so had to replace the gimbal controller too. I bought a replacement controller BGC-3-1 and a  Frame for spare parts to fix the damaged frame. I have recently began looking into setting the gimbal up, now that my flying is picking up.

I thought i would leave this little tip on how to connect the gimbal controller to the radio transmitter, enabling you to control the movements of the gimbal using the pots on the radio. It took me while to figure it out and a search on the internet did not mention how to set this up, so hopefully this video will help you setup your gimbal in the same way. Leave a comment, if you have an questions on the above.
I stated that the gimbal stays in its position as long as you don´t move the pots, I must clarify, that the gimbal still has its gimbal function of keeping it level during flight and moves both on the roll and pitch axis to keep i level, in addition you can use the pot to change the angle that you want the gopro to shoot from.

Ingen kommentarer:

Send en kommentar